Home All Services

Subservices

Bathtub Installation Shower Remodeling Tub-to-Shower Shower-to-Tub Bathroom Flooring Vanity Installation Walk-In Tub Toilet Installation Bathroom Lighting Small Bathroom Styles Service Areas Pricing About Us FAQs Contact Us Call (909) 494-5343
4.9 Google Rating|Permits Handled
Bathtub Specialists

Bathtub Installation
San Bernardino

Pro Bathroom Remodeling handles bathtub installation in San Bernardino homes, from swapping a cracked alcove tub to setting a freestanding soaker in a larger primary bath. We remove the old tub, check the drain, valve and subfloor, rebuild the waterproofing behind the surround, and install the new tub with our own in-house crew. If you are weighing refinishing, a liner or full replacement, the sections below lay out the honest trade-offs.

Signs Your Old Bathtub Needs Replacing

Most bathtub replacement calls come down to a few problems: cracked or chipped enamel that will not hold another repair, a tub too shallow or too tall for the people using it, or a surround that has been leaking behind the wall for a while.

Many older homes, especially those built through the 1970s in San Bernardino, Colton and Redlands, still have their original cast iron or steel tub. These tubs hold up structurally, but the finish wears through, and refinishing only buys a few more years. Soft drywall, loose tiles or a musty smell near the tub mean water has likely reached the framing.

White alcove bathtub with tiled niche and shower curtain
Walk-in tub with door, grab bar and tiled niche
READY FOR A TUB UPGRADE?

Let's Plan Your Bathtub Installation

Types of Bathtubs We Install

Most replacements work with the space you already have. Here is what each style involves.

White alcove bathtub with tiled niche and shower curtain

Alcove Bathtubs

The most common tub in local homes, set into a three-wall niche with the shower above it. Most alcoves are framed for a standard 60-inch tub, so a same-size replacement usually fits without moving walls. We check the drain side and valve height before ordering.

Drop-in deck-mounted tub with tiled apron

Drop-In and Deck-Mounted Tubs

A drop-in tub sits inside a framed deck finished in tile or stone, with only the rim showing. It suits larger bathrooms and corner layouts. The deck needs an access panel for the drain and any pump, which we plan into the framing.

Freestanding soaking tub with floor-mounted faucet under a window

Freestanding Soaking Tubs

A freestanding tub stands on its own feet or base, usually in a primary bathroom with open floor space. The drain often has to move toward the center of the tub, which means opening the floor for a floor-mounted or wall-mounted filler.

Jetted hydrotherapy bathtub with tiled deck

Jetted and Whirlpool Tubs

Jetted tubs use water or air jets for a massaging bath. They need an electrical circuit for the pump, a reachable access panel and regular cleaning of the jet lines. We confirm your electrical panel can handle the added circuit first.

Rectangular freestanding tub with floor-mounted filler and wall niche

Tub-Shower Combos and Surrounds

A tub-shower combo gives a family a tub for the kids and a shower for everyone else. We replace the tub, shower valve and surround together, using acrylic panels or tile over a waterproofed wall. Want to replace the bathtub with a shower?

Bathtub Materials Compared

The material decides how heavy the tub is, how it feels and how it holds up. The general trade-offs:

  • Acrylic

    Lightweight, warm to the touch and made in the widest range of shapes and sizes. Light scratches can often be buffed out, and it is the most common replacement choice.

  • Fiberglass

    The lightest and lowest-cost option. The gelcoat can dull, flex or crack over time, so it suits a rental better than a bathroom you will keep for years.

  • Enameled steel

    A hard, glossy porcelain-on-steel finish at a moderate price. It loses heat quickly, can sound hollow, and a deep chip can rust if it is left unrepaired.

  • Cast iron

    Very durable enamel and excellent heat retention. It is heavy enough that we check the floor framing first, and it usually costs more to buy and install.

Bathtub Replacement vs. Refinishing or a Liner: Which Fits?

The right choice depends on what is actually wrong with your tub.

Worn bathtub with dated tile before refinishing or replacement

Bathtub Refinishing

A sprayed-on surface coating that can extend the life of a structurally sound tub by a few years. It does not fix leaks, cracks or a layout that no longer works. Best for: cosmetic wear only, with dry walls and floors around the tub.

New white alcove tub with tiled surround and window niche

Bath Liner Over the Old Tub

A molded acrylic shell fitted over your existing tub. It goes in quickly, but any damage from a leaking surround stays hidden behind it. Best for: a sound tub and dry walls where you mainly want a new surface.

Full Bathtub Replacement

We remove the tub and surround, inspect the framing, subfloor and drain, then rebuild the waterproofing and set a new tub. It is the reliable fix for cracked enamel, water damage or a tub that no longer suits you. If no one uses the bathtub anymore, consider our tub-to-shower conversion service.

Bathtub Replacement Worries: Floor Weight, Hidden Leaks and Resale

Weight:

a cast iron tub full of water is a heavy load, so we check the joists before setting one on an upper floor or an older raised floor.

Hidden damage:

rot under an old tub is common, and if we find it, you see it and get the repair as a separate quote line before work continues.

Resale:

when the job needs a permit, we pull it, because unpermitted work can come up in California resale disclosures.

How Our Bathtub Replacement Process Works

Six steps, one in-house crew from start to finish.

1. Free Consultation

We measure the tub and alcove, look at the valve and drain, and check for signs of leaks. You then get an itemized quote with materials and labor broken out.

2. Tub and Material Selection

Our designer visits before demolition to settle the tub, surround and fixtures with you. We also confirm whether your job needs a permit and pull it if it does.

3. Old Tub Removal

We protect the floors and the path out of the house, then remove the surround and old tub. Cast iron tubs are usually broken up in place so they leave without damaging doorways.

4. Plumbing and Waterproofing

With the wall open, we repair any damaged framing or subfloor, update the drain, overflow and valve as needed, and add grab bar blocking if you want it. The walls then get a Wedi board system or a RedGard liquid membrane.

5. Tub and Surround Installation

The new tub is leveled and set, often in a mortar bed for support, then connected to the drain and overflow. The surround, trim and caulk follow, and every connection is leak tested.

6. Final Walkthrough

We fill the tub, run the shower and walk through every detail with you. Most tub replacements take 2 to 4 days from removal to this final check.

What Affects a Bathtub Installation Estimate?

The tub material, the condition of the existing surround, and any drain or valve changes affect the scope of bathtub installation. We check the opening and subfloor before preparing an itemized estimate. For the broader pricing breakdown, see our bathroom remodel cost guide.

Why Homeowners Choose Us for Bathtub Replacement

What you can expect when we replace your tub:

Installer leveling a new bathtub against open framing

In-house crew:

the same crew handles removal, drain and supply connections, and installation, with no rotating subcontractors.

Insured:

General liability and workers' compensation coverage on every tub job since 2009.

Named waterproofing:

every surround goes over a Wedi board system or a RedGard liquid membrane, never caulk alone.

Itemized quotes and permits:

materials and labor are broken out, and we pull and manage any permit the job needs.

Honest advice:

if refinishing will do the job, we tell you, even though replacement is the bigger ticket.

What Homeowners Say After Their New Bathtub

"Our old tub had a crack that finally gave out. New tub and surround took two days and looks brand new."

Nancy L. - San Bernardino

"They talked us through walk-in tub options for my mother-in-law and installed it without any drama."

Frank O. - Yucaipa

"Freestanding soaking tub install was clean, fast, and exactly what we pictured."

Kelly S. - Chino

"Honest advice on refinishing vs replacing saved us from wasting money on a temporary fix."

Raul V. - Colton

Recent Bathtub Replacement Projects

Older alcove bathtub with beige tile surround ready for replacement
San Bernardino - Freestanding Tub
Walk-in tub beside a wood vanity in a remodeled bathroom
Redlands - Walk-In Tub
Alcove tub with tiled shower wall and niche
Rancho Cucamonga - Alcove Tub
Deck-mounted soaking tub with tile surround under a window
Fontana - Deck-Mounted Tub

Get Your Free Bathtub Replacement Quote

Tell us what is not working with your current tub. We will measure, check behind the wall and give you an honest, itemized price with no pressure to sign.

Pro Bathroom Remodeling is a contractor working throughout San Bernardino County, with itemized pricing and permits handled start to finish.

Request your free in-home estimate and we'll follow up to discuss the next step.

READY FOR A TUB UPGRADE?

Let's Plan Your Bathtub Installation

Bathtub Installation FAQs

Alcove tub with dark accent tile stripe and floating wood vanity